BACKUP CAMERA SYSTEMS
FACTORY OEM Integrated Backup Camera
2009 - 2014 AUDI Q5
The Interface Module is a plug and play integration system that displays video/camera feed onto the factory screen.
Module activates through a trigger wire for a momentary switch to the designated input and has built in audio switching for a factory audio/video integration experience.
OEM System Integration
Dedicated Rear View Camera Input
(3) Video Inputs (Frontal Nightvision Camera, DVD, iPod, etc.)
CCD HD Camera Features:
High Definition CCD SONY Lens
170 Degree Wide Angle View
Mirror Image View
Grid Line Distance Markers
The rear view image appears automatically when the vehicle is placed into reverse
|AUDI Backup Camera|
|SONY CCD (HD)|
|Horizontal Viewing Angle||
|Vertical Viewing Angle||
728 x 582
520 TV Lines
Note: 3G MMi Systems with SD Card Slots and Navigation have control knobs on the center console, not on the dash board
Note: Internal MMi or No Navigation/MMi have the MMi controls on the radio itself on the dash board
The Interface Moduel is an externally wired plug and play video interface that is installed inline of the navigation computer navigation screen.
Simply plug the vehicles OEM wiring harness into one end of the wiring harness provided with the Interface module, then plug the other end of the Interface harness into the location where the vehicles wiring harness was. Then connect 12V power, ground, and backup camera wire if installing back-up camera. The installation is really simple and the package contains full diagrams and descriptions. Since the unit is plug and play and only requires extra wiring for 12V and ground, it will not void your vehicles factory warranty in most cases.